Cement Adhesive
It is a kind of cement as a gelling agent, adding polymer and inorganic powder surety agent,
adhesive to become a high strength adhesive for panels.
Performance:
Shear strength ≥1.5mp
Adhesive strength ≥1.0mpu
Initial setting time: 0.5-1.0h
Features:
1. High adhesive strength: adhesive strength is 2-3 times that of pure cement
2. Good construction performance: good water retention behaviors, work-ability, anti sagging resistance
3. Cost saving: is a thin viscous, can greatly reduce the amount and cost savings
4. Good durability: has a certain flexibility and a thin layer of adhesive belongs. Enhanced
resistance to deformation, and therefore has good durability
The DQ-1 Anti crack Mortar is mainly made from the normal 42.5 Portland cement, mixed with anti-crack materials and some additives by the pre-dry mixing techniques, the finishes appear s powder. It can be used as the level coat for
exterior wall. It is better to use the mortar together with the alkaline-resistant fiber glass cloth to prevent the wall cracking. With the character of the anti-crack , the mortar has become a necessary part for insulation wall which can improve the
quality of the building and keep the wall from cracking.
Anti-crack Tape
function:Sticking to the gap or connection between two panels, and avoiding the panel
to crack.
Feature: excellent capacity of anti-commanding, anti-cracking, thin,soft, easy connecting, durable. Environmentally friend product. It is the best
stitching and decorative product for the gypsum board, plywood panel and other wall panel.
Usage: Clean off dust in the gap between two panels. Plastering in the gap, then using 801
mortar or white mortar to stick the anti-crack tape in the gap.
Spec: 5cm( W)x40m (L) 10cm(w)x40m(L)
Fiber Mesh Cloth
Fiber mesh cloth is a glass fiber woven fabric as the substrate, the polymer emulsion
antiimmersion coating. It has good alkali resistance, flexibility and high weft tension
resistance, can be widely used in building wall for function of insulation, waterproof,
anti cracking and etc..Glass fiber network cloth with alkali resistant fiberglass mesh,
it uses the alkali glass fiber yarn(the main component of Portland, good chemical stability) by the
special microstructure of a leno weaving and, after the anti alkali, heat setting
treatment such as reinforcing agent.